Voltage Regulator still Problem

Replies to This Discussion

Permalink Reply by Martyn Holder on September 5, 2011 at 17:32

Unfortunately the Manual I have downloaded only shows a partial diagram and currently waiting for a call back from Cunninghams but will be too old to drive by the time I get one!!

• ▶ Reply

Permalink Reply by Alex on September 5, 2011 at 20:14

Hi martyn

 

Chack out this post:

http://www.qpodclub.com/forum/topics/electrical-problem?commentId=1...

 

Also check the 3 Yellow wires that plug in to the bottom of the regulator with a meter.

The resistance should be about the same between all 3 wires.

All 3 should connect to each other but NOT to Earth.

 

Hope this helps....

Alex.

 

It may be the al

 

 

 

• ▶ Reply

Permalink Reply by Martyn Holder on September 5, 2011 at 20:38

Thanks Alex but I think my problem is the actual wiring - I thought I had numbered the wires to replace them on the new regulator there are 6 divided into 2 groups of 3.  in the one group; there are blue red and pink wires and in the other there are 2 yellows and a red.  On the bottom of the regulator the terminals seem to be markes left to right as G G R    + B L C  If someone could check theirs and let me which wire connects to which terminal I would really appreciate it.

thanks

Martyn

Alex said:

Hi martyn

 

Chack out this post:

http://www.qpodclub.com/forum/topics/electrical-problem?commentId=1...

 

Also check the 3 Yellow wires that plug in to the bottom of the regulator with a meter.

The resistance should be about the same between all 3 wires.

All 3 should connect to each other but NOT to Earth.

 

Hope this helps....

Alex.

 

It may be the al

 

 

 

• ▶ Reply

Permalink Reply by Chris Manley on September 5, 2011 at 21:20

Hi Martyn,

Apart from all this, hope you are well!

Not much help but I just had a look at mine and all the wires are in a loom, sheathed with black plastic cover and there is a large rubber looking plug fitting to the regulator so I can't see any colours!

Have you called / emailed Cunninghams?  Maybe Elvis can help you!

Regards

Chris

• ▶ Reply

Permalink Reply by Martyn Holder on September 5, 2011 at 21:34

Thanks Chris - the cover is just a dirt protector it rolls back and you can see the wires connected to the regulator.  I have left one message at Cunninghams but not had a reply - some things dont change

regards

Martyn

 

• ▶ Reply

Permalink Reply by Chris Manley on September 6, 2011 at 7:33

I know what you mean! 

 

I didn't realise it was justa a cover, will try to have a look tonight for you, it means taking the number plate off and to be perfectly honest, at the time I looked last night I just could not bring myself to do that!!!

 

Chris

 

 

• ▶ Reply

Permalink Reply by Martyn Holder on September 6, 2011 at 17:40

Thanks a million Ron - I did have them on ok - but its peace of mind. Hopefully the burning smell is just newness - regards Martyn

ron taylor said:

Martyn

The wire sequence is as follows left to right

TERMINAL                  WIRE

g                                yellow

g                                yellow

r                                 red

+                                no wire

b                                 orange

l                                  red

c                                 grey

Regards

 

Ron

• ▶ Reply

▶ Reply to Discussion