"Geoff, it has occurred to me that if you remove the bolt through the lower suspension mount, you should be able to swing the whole wheel and hub assembly outwards, hinging on the shock upper mount and therefore releasing the U/J joint from the…"
You have a choice to either remove the Hub as an assembly, or to remove the drive shaft through the brake hub leaving the hub in place along with the brake still in place.
From memory the following needs to be done.
Hi there, I am trying to get the whole engine/gearbox assembly out of my Qpod Sport 340. For the moment I didn't get very far (for something as small and theoretically simple it is proving problematic).I figured the whole thing would be easier to work on if taken out because, to my mind, there is no way to get around the engine with it in situe and it badly needs an overhaul.So as a start I wanted to remove the drive shafts, clearly there are the pinch bolts and the locking ring on the drive…See More
How is everything with you, I picked interest on you after going through your short profile and deemed it necessary to write you immediately. I have something very vital to disclose to you, but I found it difficult to express myself here, since it's a public site.Could you please get back to me on:(firstname.lastname@example.org ) for the full details.