Qpod Club - be part of the fun!
Add a Comment
Join Secma Qpod Club
Many thanks Alan...all sorted. Bearings weren't marked other than "Yugoslavia" but 6205 is correct. Got them from simply bearings made by SKF...hope they last longer than the originals.
Hi Chris. I have just done mine this weekend along with brake cylinders and shoes!
Any bearing shop will carry them. I use Anglia bearings in Ipswich as they hold good quality spares, but then they wouldn't be any good to you if you don't live in the area!!
Or go on e-bay and search 6205RS. They are a standard car / bike size. There are two per hub. It would be better if you could remove the bearings first and double check the bearings code which is etched on the bearing side face (in this case 6205RS). This is the size and type code. You need the sealed type.
Hope you have an easier job that me. Every blessed bolt was seized solid. Once off its a fairly straightforward job. However popping the new bearings in the freezer for a couple of hours meant they virtually dropped back into place.
Good luck. If I can be of any help please let me know.
Welcome toSecma Qpod Club
Sign Upor Sign In
Created by Alec Oct 6, 2008 at 9:39am. Last updated by Alec Oct 6, 2008.
Created by Alec Oct 5, 2008 at 1:36pm. Last updated by Alec Oct 5, 2008.
Secma & Qpod spotlight
Qpod Sport by John Nichols
If you would like your Qpod to be featured, please email it to: admin (at) qpodclub.com
© 2019 Created by Alec.
Report an Issue |
Terms of Service
Please check your browser settings or contact your system administrator.