Secma Qpod Club

Qpod Club - be part of the fun!

Hi everyone...does anyone know where I can get rear bearings for 2007 QPOD sport ? I've emailed Cunninghams but haven't had a reply. Thanks

Add a Comment

You need to be a member of Secma Qpod Club to add comments!

Join Secma Qpod Club

Comment by Chris Hender on October 6, 2018 at 18:55

Many thanks Alan...all sorted. Bearings weren't marked other than "Yugoslavia" but 6205 is correct. Got them from simply bearings made by SKF...hope they last longer than the originals.

Comment by Alan on September 30, 2018 at 20:30

Hi Chris.  I have just done mine this weekend along with brake cylinders and shoes!

Any bearing shop will carry them.  I use Anglia bearings in Ipswich as they hold good quality spares, but then they wouldn't be any good to you if you don't live in the area!! 

Or go on e-bay and search 6205RS.  They are a standard car / bike size.  There are two per hub.  It would be better if you could remove the bearings first and double check the bearings code which is etched on the bearing side face (in this case 6205RS).  This is the size and type code.  You need the sealed type.

Hope you have an easier job that me.  Every blessed bolt was seized solid.  Once off its a fairly straightforward job.  However popping the new bearings in the freezer for a couple of hours meant they virtually dropped back into place.

Good luck.  If I can be of any help please let me know.

regards

Alan

Notes

Read the Rules

Created by Alec Oct 6, 2008 at 9:39am. Last updated by Alec Oct 6, 2008.

Introduce yourself!

Created by Alec Oct 5, 2008 at 1:36pm. Last updated by Alec Oct 5, 2008.

 

Secma & Qpod spotlight

Qpod Sport by John Nichols

If you would like your Qpod to be featured, please email it to: admin (at) qpodclub.com

© 2018   Created by Alec.   Powered by

Badges  |  Report an Issue  |  Terms of Service